Samson DOUBLE BRAID Class II Tips for Stripping the Cover Manual de usuario descargar pdf (Pagina 2)

PAGE 2 OF 4

SamsonRope.com | Email [email protected] | Tel +1.360.384.4669

Double Braid Class II Stripping Cover

SAMSON SPLICING INSTRUCTIONS

REMOVING COVER

MARKING CORE

Cut off the cover at Mark 2 and discard

the rest of the cover material.

From the front of the lock stitch toward the end of the exposed core,

measure 15 inches and put a mark on the core. This will be Mark A.

Insert a splicing d with

the cover into the core

as close to the lock stitch

as possible. Continue

pushing the d through

the center of the core and

extract the d and cover at

Mark A on the core.

Pull the cover out of the core until Mark 1 is exposed. Unbraid

the cover from the end back to Mark 1. Angle-cut the strands

from Mark 1 to the end of the cover to perform a taper.

At the point of cover insertion into the core, milk the core down toward the end of

the cover. This will cause the cover to disappear into the core.

Whip the area where the cover is inserted into the core,

to nish. (

See pages 3-4

for tips on whipping.)

step

COVER INTO CORE

UNBRAIDING COVER

MILKING THE CORE

WHIPPING

step

Mark 1

Cut off cover

at Mark 2 and

discard

15"

Mark A

cover

Lock stitch

Fid entrance

Fid exit

core

step

Mark A

core

Mark A

Cut off cover strands

at and angle

step

1 2 3 4

Comentarios a estos manuales

Sin comentarios

Samson DOUBLE BRAID Class II Tips for Stripping the Cover Manual de usuario Pagina 2

Comentarios a estos manuales

Relacionado con productos y manuales para Herramientas Samson DOUBLE BRAID Class II Tips for Stripping the Cover