Samson 12-STRAND Class II Tuck-Bury End-for-End Splice Manual de usuario descargar pdf

PAGE 1 OF 3

SamsonRope.com | Email [email protected] | Tel +1.360.384.4669

12-Strand Class II Tuck-Bury End-For-End Splice

SAMSON SPLICING INSTRUCTIONS

step

Tape the ends of the ropes to be

spliced. Lay Ropes A and B side-by-

side and measure 1-1/2 tubular d

lengths, (if using a wire d, measure

3 d lengths because wire ds are

half size) from the taped end of

each line and make Mark 1.

From Mark 1, measure

1-3/4 d lengths and make

Mark 2 on both ropes.

step

At Mark 1, pull out half the strands (3 “S” and 3 "Z") by rotating

around the rope, pulling out strands in the pattern shown:

Z Strands = counter clockwise twist

S Strands = clockwise twist

This should leave 6 strands still braided down the middle.

Tightly tape the ends of the 6 individual strands, and the

end of the remaining braided portion.

On 1 side you should have 2 S and 1 Z

and on the other side, 2 Z and 1 S.

The Tuck-Bury splice is designed as a short splice for Class II 12-strand ropes only.

MEASURING AND MARKING

TAPERING THE TAIL

Reposition the ropes for splicing according

to the diagram.

step

ROUTING THE STRANDS

Mark 1Mark 2

1-3/4 ﬁds 1-1/2 ﬁds

Rope A

Rope B

Mark 1

Bitter end

Rope B

Mark 1

Rope A

Mark 1

Mark 2

Mark 1

Entry pointExit points

Standing rope

step

From Rope A, pass the 3 closest strands to Rope B through Rope B, 1 or 2

picks down from Mark 1. Do not pull strands all the way through at this stage.

The strands enter at the entry point 2 picks from Mark 1, and exit at the exit

points 2 picks from the entry point.

BURYING THE TAIL OF ROPE A INTO ROPE B

1 2 3

Indice de contenidos

Pagina 1 - ROUTING THE STRANDS

PAGE 1 OF 3SamsonRope.com | Email [email protected] | Tel +1.360.384.466912-Strand Class II Tuck-Bury End-For-End SpliceSAMSON SPLICING INST

Pagina 2 - TAPERING THE TAILS

PAGE 2 OF 3SamsonRope.com | Email [email protected] | Tel +1.360.384.466912-Strand Class II Tuck-Bury End-For-End SpliceSAMSON SPLICING INST

Pagina 3 - FINISHING THE SPLICE

PAGE 3 OF 3SamsonRope.com | Email [email protected] | Tel +1.360.384.466912-Strand Class II Tuck-Bury End-For-End SpliceSAMSON SPLICING INST

Comentarios a estos manuales

Sin comentarios

Samson 12-STRAND Class II Tuck-Bury End-for-End Splice Manual de usuario

Busca en linea o descarga Manual de usuario para Herramientas Samson 12-STRAND Class II Tuck-Bury End-for-End Splice. Samson 12-STRAND Class II Tuck-Bury End-for-End Splice User Manual Manual de usuario

Indice de contenidos

Comentarios a estos manuales

Relacionado con productos y manuales para Herramientas Samson 12-STRAND Class II Tuck-Bury End-for-End Splice